ZMS cable company NYCWY type power cable
It is a Power cable 0,6/1 kV, VDE-approved concentric cable.
Plain stranded copper conductor according to DIN VDE 0295 and IEC 60228 cl. 1 or 2
Core insulation of thermoplastic PVC
Core color-coded according to DIN VDE 0293-308
Cores stranded concentrically
Concentric conductor of Cu tape and Cu wires
The sheath of thermoplastic PVC, sheath color black
PVC is self-extinguishing and flame resistant, according to DIN VDE 0482 part 265-2-1/ EN 50265-2-1/ IEC 60332-1
Power and control cable according to DIN VDE 0276 part 603, HD 603. S1 and IEC 60502
Temperature range during installation from -5°C to +50°C; fixed from -30°C to +70°C
Nominal voltage Uo/U 0,6/1 kV
Minimum bending radius for single-core approx. 15 x cable diameter, multi-core approx. 12 x cable diameter
NYCWY for energy supply is used in industry and distribution boards, power stations, house connection boxes, and street lighting as well as control cables for impuls and data transmission.
These cables are also suitable for all areas where increased electrical and mechanical protection is required.
Cables for outer or inner installation, into the water, concrete as well as for cable ducts.
A concentric conductor (C) is permitted to be used as a neutral or protective earthed conductor.
Simultaneously, the concentric conductor can be used as a screening. Due to the typical construction of concentric conductors, it is possible to obtain many cable joints without cutting any conductor.
In that way, the operating reliability is guaranteed.
Copyright ? 2010 - 2025 zmscable.com All Rights Reserved.
